Award Winning Solar Energy Installation

Home >> Residential >> Massachusetts >> Peabody >> Ways In Which Solar Energy Can Be Used

In Home Energy Audit
Affordable Pricing

Going Solar Is Now Affordable

Our Experienced Solar Consultants Help You Design The Perfect Solution

From examining your current eletrical usage and costs to assisting with the correct financing plan, you will receive a custom designed solar energy plan which suits you and your family.

What Our Customers are Saying

"We found all of the employees with whom we in contact from the sales representative to the installers to be knowledgeable and professional. All our questions were answered satisfactorily which is why we decided panels installed. We were also impressed with the company’s A+ rating by the Better Business Bureau.” – Pat S. – Boston

"Our first two bills were approximately $300.00 less than before and our third bill, just received was down about $250.00 from what we were paying! We think it is fantastic!" - William R. - Waltham MA

"They did a wonderful job on my system and I would recommend them to my family and friends!" - Georg S. - Chicopee MA

I cannot express my gratitude for going forward with solar panels. From the initial meeting to discuss the possibility to the techs who eventually installed them. But most of all, it is the savings we have experienced. That first month was unbelievable. Solar plus our other electric source combined was less than our usual monthly expense. During the summer when our electric usage is higher because of the air conditioning, our monthly expense was still less than what we have paid with past summer usage. And if that’s not enough…our present electricity is primarily supplied by the solar panels. We have been building up a reserve with our other electricity source and will be able to draw from that all winter when our panels wont’t generate as much electricity. It’s a win-win situation that we’re just thrilled over. Having a fixed rate locked in is another great feature for savings.” – Virgil T. – Westport MA

Our Services

Ready To Go Solar?

  • Fully licensed & insured installers
  • Custom tailored solutions
  • Free in home consultations
  • Easy financing options
  • 20 year warranty
  • Transparent contracts
  • Eco-friendly
  • State and federal incentives
  • Roof repair if damaged during installation
  • Customer service is our top priority

About Solar Energy

Solar power is energy from the sun that is transformed into thermal or electrical energy.

Solar energy is the cleanest and most abundant renewable resource source available, and the United States has some of the richest solar resources worldwide. Modern innovation can harness this energy for a variety of usages, consisting of producing electricity, supplying light or a comfortable interior environment, and heating water for domestic, commercial, or industrial usage.

Solar Benefits

Solar power makes it possible for homeowner to use the sun to power daily life: running your air conditioner, washing clothing, viewing TELEVISION, cooking supper. All while lowering your carbon footprint, and without burning nonrenewable fuel sources or putting a stress on the electrical grid. And while the ecological advantages of solar power are substantial, many property owners find that the benefit, unique functions, and expense savings of owning a solar power system are a lot more alluring.

Leading Benefits of Solar Energy

#1 Significantly minimize or even eliminate your electrical bills

Whether you're a house owner, business, or not-for-profit, electrical power costs can make up a big portion of your regular monthly expenditures. With a solar panel system, you'll generate complimentary power for your system's whole 25+ year lifecycle. Even if you do not produce 100 percent of the energy you take in, solar will reduce your utility costs and you'll still save a great deal of cash.

#2 Make a fantastic return on your financial investment

Photovoltaic panels aren't an expense-- they are among the best ways to invest, with returns matching those of more conventional investments like stocks and bonds. Thanks to considerable electricity expense cost savings, the average American homeowner settles their solar panel system in seven to 8 years and sees an ROI of 20 percent or more.

#3 Protect versus rising energy costs

One of the most clear cut advantages of photovoltaic panels is the capability to hedge utility costs. In the previous 10 years, property electrical energy costs have increased by an average of 3 percent annually. By buying a solar energy system now, you can fix your electrical power rate and protect against unpredictable increases in electrical energy expenses. If you're a company or house owner with fluctuating capital, going solar also assists you much better projection and manage your costs.

#4 Increase your property worth

Numerous studies have discovered that homes geared up with solar energy systems have higher home worths and sell quicker than non-solar homes. Appraisers are progressively taking solar installations into consideration as they value homes at the time of a sale, and as homebuyers end up being more educated about solar, demand for residential or commercial properties equipped with solar panel systems will continue to grow.

#5 Boost U.S. energy independence

The sun is a near-infinite source of energy and an essential element of attaining energy self-reliance in the United States. By increasing our capability to produce electrical energy from the sun, we can also insulate our country from price fluctuations in worldwide energy markets.

#6 Develop jobs and assist your local economy

Inning accordance with The Solar Structure, the solar market included jobs at a rate almost 12 times faster than the general U.S. economy in 2015, representing 1.2 percent of all jobs in the nation. This growth is expected to continue. Because solar-related jobs have the tendency to be greater paying and can not be contracted out, they are a significant contributor to the U.S. economy.

#7 Protect the environment

Solar is a great method to decrease your carbon footprint. Buildings are accountable for 38 percent of all carbon emissions in the United States, and going solar can significantly decrease that number. A common domestic photovoltaic panel system will eliminate 3 to four lots of carbon emissions each year-- the equivalent of planting over 100 trees each year.

#8 Show your commitment to sustainability

Sustainability and corporate social obligation are very important parts of a company's culture and values. They also produce bottom line outcomes. Progressively, customers and communities are recognizing and rewarding businesses that opt to run properly. Companies are discovering that "green" credentials are a powerful motorist of customer purchasing decisions, creating goodwill and enhancing service results.

#9 Start Conserving from Day 1

Solar purchase power arrangements (PPAs) and solar leasing has made it possible for house owners to go solar for little or no cash down.

Numerous property owners choose to finance their photovoltaic panels with among the "pay-as-you-go" funding alternatives. This means that a third-party company-- the solar supplier-- owns the planetary system and takes care of setup, upkeep, tracking and repairs. You simply pay the solar provider for electrical energy-- less than you would've paid the energy company.

As of June 2013, 75% of all American homes have access to pay-as-you-go solar.

#10. Solar is a Secure Investment

The utility business are well-known for their varying and undependable electrical power costs. There is clearly an upward pattern.

With solar panels and easy math, we can calculate what does it cost? electrical energy will be produced, and most notably, at exactly what cost, for a minimum of the next Twenty Years (repaired energy costs).


What are the various payment options?

We have many flexible purchasing agreements for customers who would like to install a new home solar system. There are three different payment options, making them a viable choice for customers of all budgets. The payment options include Lease, PPA, and Purchase.

The Lease

  • Low, fixed payments each month
  • System insurance for 20 years, including maintenance
  • Flexible end-of-term options, including system upgrade, lease extension, and free panel removal

Power Purchase Agreement (PPA)

  • We own the solar panel system
  • $0 down for installation
  • Customers only pay for the solar energy that they use


  • Customer pays for the system upfront and owns the system
  • System monitoring and maintenance for 20 years
  • Receive 30% federal tax credit
  • See a return on investment within 7-10 years

What happens when the contract for my lease is finished?

We provide our customers with a few different options for when their lease contract is up. Customers can upgrade their equipment to the newest solar technology available, extend the agreement, or have the panels removed at no cost.

What is the warranty?

The Lease and PPA include a 20-year warranty during the lifetime of the system. This warranty exceeds that of most other solar installers’ warranties.

Frequently Asked Questions

How Can I Build My Own Solar Panel?

A solar cell is a device for converting energy from the sun into electricity. The high-efficiency solar cells you can buy are made from highly processed silicon, and require huge factories, high temperatures, vacuum equipment, and lots of money. If you are willing to sacrifice efficiency for the ability to make our own solar cells in the kitchen out of materials from the neighborhood hardware store, we can demonstrate a working solar cell in about an hour.

The solar cell is made from these materials:
A sheet of copper flashing from the hardware store. This normally costs about £2.00 per square foot. We will need about half a square foot.
Two alligator clip leads.
A sensitive micro-ammeter that can read currents between 10 and 50 microamperes. loads of places sell small LCD multimeters that will do, but I used a small surplus meter with a needle.
An electric stove. My kitchen stove is gas, so I bought a small one-burner electric hotplate for about £15. The little 700 watt burners probably won't work -- mine is 1100 watts, so the burner gets red hot.
A large clear plastic bottle off of which you can cut the top. I used a 2 liter spring water bottle. A large mouth glass jar will also work.
Table salt. We will want a couple tablespoons of salt.
Tap water.
Sand paper or a wire brush on an electric drill.
Sheet metal shears for cutting the copper sheet.

The first step is to cut a piece of the copper sheeting that is about the size of the burner on the stove. Wash your hands so they don't have any grease or oil on them. Then wash the copper sheet with soap or cleanser to get any oil or grease off of it. Use the sandpaper or wire brush to thoroughly clean the copper sheeting, so that any sulphide or other light corrosion is removed.
Next, place the cleaned and dried copper sheet on the burner and turn the burner to its highest setting.
As the copper starts to heat up, you will see beautiful oxidation patterns begin to form. Oranges, purples, and reds will cover the copper.
As the copper gets hotter, the colors are replaced with a black coating of cupric oxide. This is not the oxide we want, but it will flake off later, showing the reds, oranges, pinks, and purples of the cuprous oxide layer underneath.
The last bits of color disappear as the burner starts to glow red.
When the burner is glowing red-hot, the sheet of copper will be coated with a black cupric oxide coat. Let it cook for a half an hour, so the black coating will be thick. This is important, since a thick coating will flake off nicely, while a thin coat will stay stuck to the copper.
After the half hour of cooking, turn off the burner. Leave the hot copper on the burner to cool slowly. If you cool it too quickly, the black oxide will stay stuck to the copper.
As the copper cools, it shrinks. The black cupric oxide also shrinks. But they shrink at different rates, which makes the black cupric oxide flake off.
The little black flakes pop off the copper with enough force to make them fly a few inches. This means a little more cleaning effort around the stove, but it is fun to watch.
When the copper has cooled to room temperature (this takes about 20 minutes), most of the black oxide will be gone. A light scrubbing with your hands under running water will remove most of the small bits. Resist the temptation to remove all of the black spots by hard scrubbing or by flexing the soft copper. This might damage the delicate red cuprous oxide layer we need to make to solar cell work.

The rest of the assembly is very simple and quick.

Cut another sheet of copper about the same size as the first one. Bend both pieces gently, so they will fit into the plastic bottle or jar without touching one another. The cuprous oxide coating that was facing up on the burner is usually the best side to face outwards in the jar, because it has the smoothest, cleanest surface.
Attach the two alligator clip leads, one to the new copper plate, and one to the cuprous oxide coated plate. Connect the lead from the clean copper plate to the positive terminal of the meter. Connect the lead from the cuprous oxide plate to the negative terminal of the meter.
Now mix a couple tablespoons of salt into some hot tap water. Stir the saltwater until all the salt is dissolved. Then carefully pour the saltwater into the jar, being careful not to get the clip leads wet. The saltwater should not completely cover the plates -- you should leave about an inch of plate above the water, so you can move the solar cell around without getting the clip leads wet.

Solar Power Question?
How Practical Is Solar Power And When Will This Alternate Source Be Used. What Is The Future Of Solar Energy? Please Explain And Cite Your Source. Thank You.

At the present time, fossil fuels are still the cheapest form of energy for the production of electricity.

Solar power is a practical way to produce power, but at the present time it is not cost effective, due to production costs of the solar panels, their installation, converting the direct current electricity they produce to 60 cycle alternating current, and routing this power to, and connecting to, the power grid.

Only when fossil fuels become too expensive to use, will alternate forms of energy be considered.

When Solar Cells Are 10% Efficient, Is That Only For The Absorb-Able Wavelengths For The Solar Panel?
I'M Pretty Sure The Sun Emits Uv, X-Rays, Cosmic Rays, Etc., None Of Which Most Solar Panels Absorb. If Solar Panels Absorb Wavelengths Of Multiple Magnitudes, I Believe Cost Per Watt Can Still Fall Drastically.

Hey T, you're quite right. Silicone based solar electric panels only make use of the photons, one of the particles that streams in with the sunlight. The photovoltiac effect makes use of the reaction of photons with 2 alloy types, silicone phosphorous and silicone boron. The reaction forces free electrons from one wafer onto the other and a voltage is created. Solar heating panels, used to heat water, air or an other medium make use of most of the wavelength, and the medium heats up using over 90% of the suns energy. This is primarily why solar water heaters are so much cheaper to build than solar electric panels, there is a large list of materials, like steel, aluminum, copper and even wood that can make the reaction occur.

There are schools and companies doing research with other types of solar electric panels, but so far nothing has made it off the test bench. The other way to capture the suns energy to make electricity is to focus sunlight on a boiler to create steam and turn a turbine. This works fine on an industrial scale, but you won't find many home sized systems that work this way. The newest ones heat oil to over 600 degrees, store it to boil water later so they can even make electricity at night to some degree. There are some great websites to learn more, I'll list a couple below. Take care, Rudydoo

Who Uses Solar Power More?
Who Uses Solar Power More, The Government Or Citizens?

Citizens by far. According to the article below, in California, 158 MW of solar was installed in 2008, up from 78 MW in 2007.

Given California's budget crisis, I doubt many solar panels were installed by the state. And none by the Federal government, as far as I know.

Since California accounts for 70% of the US solar market (see below), this is a reasonable answer for the entire country.

I'm counting "Citizens" as being anything besides government, so Whole Foods Market or De Anza College, I would count as "Citizens".

Where Can I Buy Materials To Make Solar Cells?
Where Can I Buy Chemicals And All Materials To Build Solar Cells . Plaese Note: I Wanna To Build Solar Cells Not Solar Panel Thanks

Well, efficient solar cells require that you grow silicon wafers which means expensive vacuum chambers and vapour deposition of appropriately doped silicon. Even amorphous solar cells requires the deposition of silicon though achieving pure crystals isn't as important. You could purchase ruined batches of silicon wafers and polish off the traces to form solar cells but companies are already doing that.

You can make an inefficient solar cell from cuprous oxide, basically by heating copper. The voltage and current generated will be so low that you'll never be able to wire them up to get enough usable voltage and current from them but that won't stop idiots from trying. It's basically only useful to demonstrate the concept of photovoltaics.

A better demonstratioin would be to make solar cells from donuts and tea. It turns out that commercially made powdered donuts have Titanium Oxide particles to stretch out the powdered sugar much in the same way that sand is used in powdered hot chocolate and in powdered dishwashing detergent. These are the same particles used in paint and in sunblock but it's easiest to extract them from donuts. Titanium Oxide is a semiconductor and hence can be used to make solar cells, there has been a lot of work to make a solar paint. Essentially, you have to separate the Titanium Oxide from the powdered sugar and create layers of Titanium Oxide and an electrolyte between conductive electrodes.

You'll note that both methods involve semi-conductors. This is not chemistry, this is physics so the way you've worded your question shows that you have a lot to learn.

We Serve All of Peabody MA including these zip code areas:

01960, 01961